Rusty angle iron repair or replacement Montreal

Benefit from our rusted angle iron repair and replacement service during residential and commercial masonry work in Montreal. Call us for a quote!

During masonry work, such as brick or masonry wall replacement, masonry consolidation and securing, or bulging wall repair, we may need to repair or replace rusty angle irons to preserve the structure of your masonry wall.

What are angle irons?

Angle irons are an L- or T-shaped metal element used to reinforce and stabilize the corners of a masonry wall. They are usually attached to the outside corners of a building using appropriate fasteners such as anchors or masonry screws.

The main roles of a masonry angle iron are as follows:

• Structural reinforcement: Reinforces wall corners, helping to prevent cracking and maintain wall stability.
• Damage protection: Protects wall corners from damage caused by normal wear and tear, impact, weathering and other external factors.
• Alignment: It ensures correct alignment of bricks or stones at the corner of the wall, contributing to more precise construction.
• Aesthetic finish: In addition to its structural functions, a corner iron can also add an aesthetic touch to a building by creating clean, straight corners.

Masonry angle irons are generally made of galvanized or stainless steel to resist corrosion and wear. They are used in the construction of walls made of brick, stone, concrete and other masonry materials to reinforce corners and guarantee the structure’s durability.

What are the consequences of a rusty angle iron on a masonry wall?

• Weakening of the structure: The rust that forms on the angle iron can gradually corrode the metal, reducing its ability to strengthen and support the wall. This can lead to a loss of stability and a reduction in the wall’s structural strength.
• Expansion and pressure on masonry: As rust forms, it can cause the metal to expand, exerting pressure on adjacent bricks or stones. This can lead to cracks and damage to the masonry material.
• Cracks in the wall: The pressure exerted by rust can create cracks in the masonry wall, compromising its structural integrity and aesthetic appearance.
• Deterioration of waterproofing: Cracks and rust damage can allow water to seep inside the wall, leading to moisture problems, mold and rot, compromising the wall’s durability.
• Risk of falling debris: If rust is very advanced and the angle iron becomes unstable, there may be a risk of falling masonry debris, which can present a safety hazard.

What are the steps involved in repairing and replacing rusted angle irons?

• Initial assessment: First, we inspect the condition of the rusted angle iron and the potential damage to the masonry wall. Then we assess the appropriate size, type and thickness of new angle iron to be installed.
• Site preparation: The site is secured, with appropriate safety measures in place (safety nets, scaffolding, etc.). All objects and furniture in the vicinity of the work area are removed or protected.
• Demolition of old angle iron: We use masonry tools, such as jackhammers or grinders, to carefully remove the old rusted angle iron without further damaging the wall.
• Preparing the new angle iron:The new angle iron is cut or shaped to the appropriate dimensions for the installation. If necessary, we can also apply an anti-rust treatment to the new angle iron to increase its durability.
• Installing the new corner iron: A masonry-specific adhesive or mortar is applied to the wall where the new corner iron is to be installed, and the new corner iron is carefully positioned and secured in place. It is essential to ensure that it is level and correctly aligned.
• Finishing and sealing: All joints between the wall and the new corner iron are sealed to ensure a proper watertight seal, and aesthetic finishes can be applied according to customer preference to match the appearance of the wall.
• Final inspection: When everything is complete, we carry out a final inspection to ensure that the new angle iron is correctly installed, solid and secure.
• Clean-up: The construction site is cleaned to remove any debris or residue.

Why choose Restaure-Action for rusted angle iron repair and replacement?

Our team of qualified professionals is dedicated to specialized masonry work, and has over 60 years’ combined experience. We have all the qualifications and skills you need to repair or replace iron angle irons. We can carry out these repairs in both the residential sector (houses, apartment buildings, townhouses, duplexes and triplexes) and the commercial sector (commercial spaces, warehouses, historic buildings, etc.). 

Any questions?

If you have any questions about our rusted angle iron replacement and repair service or our other masonry services, or if you would like to request a free estimate, we invite you to contact us. Our team will get back to you as soon as possible. We travel to many parts of Montreal to offer our residential and commercial masonry services.